• Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
  • Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
  • Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
  • Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
  • Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
  • Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

CAS No.: 9009-54-5
Formula: CH3h8n2o
EINECS: 210-898-8
Bonding Function: Structural Adhesive
Application: Automobile, Construction, Energy Storage Industry
Material: Silicone
Samples:
US$ 0.1/kg 1 kg(Min.Order)
| Request Sample
Customization:
Diamond Member Since 2014

Suppliers with verified business licenses

Basic Info.

Model NO.
SS268
Classification
Room Curing
Main Agent Composition
Silicone
Characteristic
Thermal Conductivity
Color
Grey
Type
Two-Component
Main Raw Material
Silicone
Advantage
High Bond Strength and Sealing
Usage
Structural Bonding of New Energy Batteries
OEM/ODM
Free OEM&ODM Service
Shelf Life
6 Months
Cure Mechanism
Moisture Curing
Hardness
60 a
Elongation
55%
Tensile Strength
More Than 0.153 MPa
Flame Retardant
UL-94 V-0
Thermal Conductivity
2.0
Applications
Automobile, Construction, Boats, Bus, Truck
Transport Package
Air, Sea, Road and Railway.
Specification
400ml/600ml/20KG per bucket
Trademark
SEPNA
Origin
China
HS Code
3506100090
Production Capacity
1000000000

Product Description


What products do we make?
 


Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates



The model SS268 is a paste gap filler, mixed 1:1 by mass and cured to a high-performance elastomer that molds to the structure's shape, providing the best structural suitability and surface fit of structural components. It meets the needs of low stress and high compression modulus and can be automated. Low contact thermal resistance and high electrical insulation when assembled with electronic products. Healthy and environmentally friendly, RoHS compliant.

 

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
Double-part cartridge silicone adhesive sealant for new energy battery module cells

Low strength and removable Two-component thermally conductive silicone gap filler bonding of battery modules to liquid cooling plates

 

Special features
 
 
 
1. Thermal conductivity 2.0W/m.k;
2. It can be removable;
3. Excellent effect in filling irregular structure gaps.
4. Low stress, high compression ratio.
5. High electrical insulation.
6. Excellent mechanical properties and weathering resistance.


 
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
Different thermal conductivity can be customized
( Thermal conductivity :( 0.3-3.0 W/m.k )
 
0.3 W/m.k For SP280.SP281.SP282.SP283
1.2 W/m.k For SP284.SP286.SP261
1.5 W/m.k For SP263.SP287
2.0 W/m.k For SP265.SP268.SP285
3.0 W/m.k For SS269
 
Two-component thermally conductive silicone gap filler


The bonding strength has high, medium, and low strength and is Removable (when the future battery pack is bad after replacing the new battery).


Excellent aging resistance and chemical resistance
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 
 
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

Light-weight

Total vehicle weight is tied inextricably to the range of electric vehicles.
The battery pack is a major contributor, typically weighing between 600 and 700 kilograms for the average battery electric vehicle (BEV).

Smart lightweight designs can counterbalance part of this, and Sepna's engineering expertise and partnership with RLE International are fundamental for optimizing aluminum structures per crash standards and passenger safety.


 

Typical Applications
 

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 
1. Used in communication equipment, automotive electronics;
2. Used in storage equipment, consumer electronics
3. Used in computers and peripheral equipment, with excellent insulation and heat dissipation, waterproof and moisture-proof.
4. Thermal conductive bonding between the energy storage battery module and the PACK box, and between the battery cell and the PACK box.


Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

 

Technical Data Sheet
 
 
  
Specification of Part-A (resin)
Items Standard Specification Typical value
Colour Visual Blue Blue
Viscosity (mPa.s) (Brookfield, 7# 10rpm) GB/T 2794 120000-200000 120000
Density (g/cm3) GB/T 13354 1.9 ± 0.1 1.93
 
Specification of Part-B (hardener)
Items Standard Specification Typical value
Colour Visual Yellow Yellow
Viscosity (mPa.s) (Brookfield, 7# 10rpm) GB/T 2794 120000-20000 125000
Density (g/cm3) GB/T 13354 1.90 ± 0.1 1.93
 
Specification after mixture
Items Standard Specification Typical value
Mixing ratio Volume ratio A: B=1:1 /
Colour Visual Green Green
Viscosity (mPa.s)
(Brookfield, 7# 10rpm)
GB/T 2794 120000-20000 122500
Density (g/cm3) GB/T 13354 1.9 ± 0.1 1.93
Pot life (min) / 40 - 60 (adjustable) 60
Specification after cured
Items Standard Specification Typical value
Hardness (Shore A) GB/T 531 60 ± 10 60
Tensile strength (MPa) GB/T 528 0.15 0.153
Elongation (%) GB/T 528 50 55
Dielectric constant @100kHz GB/T 1409  7.0 7
Breakdown voltage KV/mm GB/T 1408.1 10 10
Thermally conductivity (W/m.k) ASTM D 5470 2.0 ± 0.1 2.05
Flame retardant (UL-94) ANSI/UL-94 V-0 V-0
Service temperature (ºC) / -40 ~ +80 /
Note: The above typical values were all detected at 25 ºC;
 
The product can be cured with heating, the curing time under different temperatures refer to the following table (non-specified value)
Curing temperature 25ºC 80ºC 100ºC
Curing time 480min 30min 20min
 
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates



 

PACKING AND STORAGE
 
Package specification:
 
 
Double tube packaging: 400ml/tube; 12 tubes/carton
Bucket: 5 gallon/bucket
Drum: 55 gallon/drum.

 
 
Storage:


The product is recommended to be stored in a dry place at 10ºC-30ºC, avoiding direct sunlight or frost. The storage period is 6 months.
After opening the package, the contents should be protected from moisture and used up as soon as possible.

 
Transportation:
 
moisture-proof, rainproof, sunproof, high-temperature roof, keep away from heat sources, handle with care, and do not squeeze or collide
 
 
 
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 

Company Profile
 


Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates




SEPNA focuses on the R&D and production of advanced new materials. Headquartered in Shanghai, the factory is located in Qidong High-tech Zone, Jiangsu Province. It is a modern technology factory with an area of 20000 square meters.

SEPNA factory uses an advanced MES automatic quality control system and a full-process ERP management system for strict quality control. 

SEPNA factory and products have passed many international system certifications. Such as ISO9001-2015, SGS, 16949, and other certificates.

SEPNA adheres to the values of being "customer-centrictake technologas the blood, and focus on high-quality", adheres to the development concept of "DEVELOP DEPEND ON THE TECHNICAL INNOVATION, LIVE DEPEND ON THE QUALITY,"; Focus on providing customers with more accurate and safe products with "bonding, sealing and protection" functions.

SEPNA product lines, from flexible sealing, and fixed bonding to the development of multiple curing forms products, can fully match the production and manufacturing processes of different customers, and SEPNA can provide all customers with more options, higher efficiency, and better quality product solutions, as well as omnidirectional customized services and support.

 

SEPNA closely connects customers/suppliers/employees/partners with the mission of "Zero SL Bonds Us Together! ". 
And continues to promote technology and product innovation, service innovation, and talent innovationbetter combine the value of products, services, and talents to make products more perfect, make industrial manufacturing more efficient, and provide more valuable products and service solutions for the high-end and high-end manufacturing industry!


Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

Why Choose Us
 



Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates


1. Outstanding manufacturers and powerful factories.
2. OEM / ODM AVAILABLE (Professional design team providing package design solutions for OEM / ODM customers free of charge.
3. Free Samples.
4. Imported Raw Materials and Test Equipment.


Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates


5. Strict quality control (We have passed GB/T 19001-2016, IS09001:2015, and IATF 16949:2016 quality system authentication, and we can provide ROHS/SGS/ MSDS certification of products).
6. Deliver in 7-15 Days after payment.
7. Excellent QC Team and R&D Team.

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
8. Provide professional application technology solutions.
9. Complete the after-sales service system.
10. Partners with Top 500 Global Companies.


Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 
Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 

Our customers and Exhibition
 

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 

Certification
 

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates
 

About Transportation
 


Samples: Express ( FedEx, DHL, TNT, UPS, etc.)
Cargo:      By Sea ( FCL / LCL), By Air, By Railway, By truck, etc.

Low Strength and Removable Two-Component Thermally Conductive Silicone Gap Filler Bonding of Battery Modules to Liquid Cooling Plates

FAQ:
 


Q1. How to get an accurate quotation from us?
A1. 
Please provide your requirements, product specifications, quantity, and trade terms. 


Q2. Can you provide OEM service?
A2.Yes.Private labeling service is available

Q3. How to be SEPNA's distributor?
A3.
As the growing of Sepna's global business, we need to find more and more distributors and agents
worldwide. SEPNA will provide the best solution and service for our partners.

For more information, pls contact our salesperson or call us:+86-400-882-1323

Q4. Can I get a sample?
A4. Yes. We offer free samples

Q5. What is your product's shelf life?
A5.9 months when stored in cool dry and well-ventilated areas under 25ºC.


Click here to get the best price.
 
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now