Sepna Good Thermal Conductivity Universal Flame Retardant Ab Epoxy Potting Adhesive for Motor Rotor Bonding Se685

• Customization: Available
• CAS No.: 9009-54-5
• Formula: CH3h8n2o
• Model NO.: SE685
• Bonding Function: Structural Adhesive
• Application: Automobile, Construction
• Material: Epoxy
• Color: Black
• Type: Two-Component
• Main Raw Material: Epoxy Adhesive
• Advantage: High Bond Strength and Sealing
• Usage: Transformer, Electronic Stator, Ignition Coil, etc
• OEM/ODM: Free OEM&ODM Service
• Shelf Life: 9 Months
• Hardness: Shore D 85
• Flame Retardant Grade: UL94 V-0
• Dielectric Strength: More Than 17 Kv Per mm
• Thermal Conductivity: 1.0
• Applications: Motor, Automotive Electronics, Power Tools
• Transport Package: Air, Sea, Road and Railway.
• Specification: 25KG per bucket
• Trademark: SEPNA
• Origin: China
• HS Code: 35069900
• Production Capacity: 1000000000

Product Description

Our products

SE685 is a solvent-free, black,

Two-component epoxy potting resin adhesive

It can be cured at room temperature or by heating.
After curing, it has excellent electrical, mechanical, and impact resistance properties. It can be applied to sample parts that must be fully enclosed and protected, such as transformers, electronic stators, ignition coils, etc.

SEPNA Good thermal conductivity Universal flame retardant epoxy potting adhesive for Motor rotor bonding SE685

 

Mixture ratio: AB=100:15 (Mass ratio)

It has low heat emission, shrinkage, and good thermal conductivity when curing.

 

Special features

 

 

1. Excellent capricious and anti-impact resistance.
2. Excellent mechanical properties and electrical properties.
3. Excellent electrical insulation, and thermal stability.
4. Flame retardant UL94 V-0.

 

5. Excellent high- and low-temperature impact performance, usually withstands 200 hours.
6. Excellent adhesion and anti-cracking properties.
7. Low water absorption, good water and moisture resistance.

 

Typical Applications

 
1. Applicable to the sample parts that need full enclosed protection, such as transformer, electronic stator, ignition coil, etc.
2. Suitable for motors, automotive electronics, power tools, reactors, instruments, and other encapsulation protection, with excellent adhesion and temperature resistance to most plastic and metal substrates.
 

 


 

Technical Data Sheet

 

Specification of Part-A (resin)
Items	Standard	Specification	Typical value
Color	Visual	Black	Black
Viscosity (mPa.s)	GB/T 2794	20000-10000	140000
Density (g/cm^3)	GB/T 13354	1.7 ± 0.1	1.74

 


 

Specification of Part-B (hardener)
Items	Standard	Specification	Typical value
Color	Visual	Transparent	Transparent
Viscosity (mPa.s)	GB/T 2794	200±100	175
Density (g/cm^3)	GB/T 13354	1.0 ± 0.1	0.98

Specification after mixture
Items	Standard	Specification	Typical value
Mixing ratio	Volume ratio	A:B=100:15	100:15
Color	Visual	Black	Black
Viscosity (mPa.s)	GB/T 2794	2000±1000	1700
Density (g/cm^3)	GB/T 13354	1.35 ± 0.1	1.36
Pot life (min)	/	50± 10	40
Gel time  25ºC/H	--	2-3	2H/20min
Curing speed	Pour 230g in a plastic cup/Room temperature	25ºC/H	24
	Pour 230g in a plastic cup /Heat curing	70ºC/2H	Fully cured

 

Specification after cured
Items	Standard	Specification	Typical value
Hardness (Shore D)	GB/T 531.1	85± 5	85
Dielectric Strength 25ºC,kV/mm	GB/T 1695	>17	18
Dielectric constant 100KHz,25ºC	GB/T 1693	3-5	4
Dielectric Losses 100KHz,25ºC	GB/T 1693	0-1	0.2
Tensile shear strength AI-AI (MPa)	GB/T 7124	≥12	12.58
Tensile shear strength Steel & Steel (MPa)	GB/T 7124	≥ 12	13
Glass transition temperature Tg (°C)	GBT 11998	50-60	55
Coefficient of linear expansion um/m.°C	GB/T 20673	--	38, 115,>Tg
Volume resistivity (Ω·cm)	ASTM D 257	≥ 10^14	3.4×10^14
Thermally conductivity (W/m.k)	ASTM D 5470	>0.9	0.96
Flame retardant (UL-94)	ANSI/UL-94	V-0	V-0
Water absorption rate 24H,25ºC, %	GB/T 8810	<0.2	0.13
Water absorption rate 24H,100ºC, %	Water absorption rate 24H,25ºC, %	≤0.6	0.6
Thermal shock test	-40ºC-+150ºC	500 times	Excellent
Service temperature (ºC)	/	-40 ~ +150	/
Note: The above typical values were all detected at 25 ºC;

 

 

Direction of Applications

Manual mixing process (230g mixing volume)

1. Preheating: AB component in low temperature, the viscosity will become high, it is recommended to preheat to 20 ~ 25 ºC, easy to use.
2. Mixing: proportionally weighing A, and B components, mixing vertical stirring rod, clockwise (or counterclockwise) in the same direction and rapid mixing for 3 minutes, 110-120 Circle/min, pay attention to the bottom of the container, the edge should also be stirred evenly, otherwise there will be a local phenomenon of non-curing.
3. Pouring: pour the mixture into the device (Note: 2-3 minutes to pour the glue on the product), if the device has a complex structure and large volume, it should be poured in stages.


 

PACKING AND STORAGE

 

Package specification:     Part A 25 KG /Bucket; Part B 6 KG /Bucket.

Storage: Shelf life: Part A 12 months, Part B 6 months in unopened packaging in a cool and dry storage place at temperatures between +8ºC to + 28ºC

Transportation:   moisture-proof, rainproof, sunproof, high-temperature roof, keep away from heat sources, handle with care, and do not squeeze or collide

 

 

Company Profile

SEPNA focuses on the R&D and production of advanced new materials. Headquartered in Shanghai, the factory is located in Qidong High-tech Zone, Jiangsu Province. It is a modern technology factory with an area of 20000 square meters.

SEPNA factory uses an advanced MES automatic quality control system and a full-process ERP management system for strict quality control. 

SEPNA factory and products have passed many international system certifications. Such as ISO9001-2015, SGS, 16949, and other certificates.

SEPNA adheres to the values of being "customer-centric, take technology as the blood, and focus on high-quality", adheres to the development concept of "DEVELOP DEPEND ON THE TECHNICAL INNOVATION, LIVE to DEPEND ON THE QUALITY,"; 
Focus on providing customers with more accurate and safe products with "bonding, sealing, and protection" functions.

SEPNA product lines, from flexible sealing, and fixed bonding to the development of multiple curing forms products,  Can fully match the production and manufacturing processes of different customers, and SEPNA can provide all customers with more options, higher efficiency, and better quality product solutions, as well as omnidirectional customized services and support.

 

SEPNA closely connects customers/suppliers/employees/partners with the mission of "Zero SL Bonds Us Together! ". And continues to promote technology and product innovation, service innovation, and talent innovation, better combine the value of products, services, and talents to make products more perfect, make industrial manufacturing more efficient, and provide more valuable products and service solutions for the high-end and high-end manufacturing industry!

 

 

Why Choose Us

1. Outstanding manufacturers and powerful factories.

2. OEM / ODM AVAILABLE (Professional design team providing package design solutions for OEM / ODM customers free of charge.
3. Free Samples.
4. Imported Raw Materials and Test Equipment.
5. Strict quality control (We have passed GB/T 19001-2016, IS09001:2015, and IATF 16949:2016 quality system authentication, and we can provide ROHS/SGS/ MSDS certification of products).




6. Deliver in 7-15 Days after payment.
7. Excellent QC Team and R&D Team.
8. Provide professional application technology solutions.
9. Complete the after-sales service system.
10. Partners with Top 500 Global Companies.
Sepna's products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia the Middle East, Oceania, etc.

Until now, she has serviced nearly 1000 enterprises all over the world.

 

 

Our customers and Exhibition

 

Certification

 

About Transportation

Samples: Express ( FedEx, DHL, TNT, UPS, etc.)
Cargo:      By Sea ( FCL / LCL), By Air, By Railway, By truck, etc.

FAQ:

Q1. How to get an accurate quotation from us?
A1. Please provide your requirements, product specifications, quantity, and trade terms. 


Q2. Can you provide OEM service?
A2.Yes.Private labeling service is available

Q3. How to be SEPNA'S distributor?
A3.As the growing of Sepna's global business, we need to find more and more distributors and agents
worldwide. SEPNA will provide the best solution and service for our partners.

For more information, pls contact our salesperson or call us:[phone]

Q4. Can I get a sample?
A4. Yes. We offer free samples

Q5. What is your product's shelf life?
A5.9 months when stored in cool dry and well-ventilated areas under 25ºC.