Sepna Ss268 Thermal Conductivity 2.0W/M. K Two-Component Silicone Gap Filler Adhesive Glue for Battery Cells, Modules & Packs

• Customization: Available
• Application: Automobile, Construction, Energy Storage Industry
• Bonding Function: Structural Adhesive
• Model NO.: SS268
• Color: Grey
• Type: Two-Component
• Main Raw Material: Silicone
• Advantage: High Bond Strength and Sealing
• Usage: Structural Bonding of New Energy Batteries
• OEM/ODM: Free OEM&ODM Service
• Shelf Life: 6 Months
• Cure Mechanism: Moisture Curing
• Hardness: 60 a
• Elongation: 55%
• Tensile Strength: More Than 0.153 MPa
• Flame Retardant: UL-94 V-0
• Thermal Conductivity: 2.0
• Applications: Automobile, Construction, Boats, Bus, Truck
• CAS No.: 9009-54-5
• Formula: CH3h8n2o
• EINECS: 210-898-8
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Silicone
• Characteristic: Thermal Conductivity
• Transport Package: Air, Sea, Road and Railway.
• Specification: 400ml/600ml/20KG per bucket
• Trademark: SEPNA
• Origin: China
• HS Code: 3506100090
• Production Capacity: 1000000000

Product Description

What products do we make?
 

sepna SS268 Thermal conductivity 2.0W/m.k  Two-component silicone gap filler adhesive glue for Battery cells, modules & packs

The model SS268 is a paste gap filler, mixed 1:1 by mass and cured to a high-performance elastomer that molds to the structure's shape, providing the best structural suitability and surface fit of structural components. It meets the needs of low stress and high compression modulus and can be automated. Low contact thermal resistance and high electrical insulation when assembled with electronic products. Healthy and environmentally friendly, RoHS compliant.

 1:1 ratio Two-part silicone glue adhesive for Electric vehicle battery module

 

Special features
 

 

 
1. Thermal conductivity 2.0W/m.k;
2. It can be removable;
3. Excellent effect in filling irregular structure gaps.
4. Low stress, high compression ratio.
5. High electrical insulation.
6. Excellent mechanical properties and weathering resistance.

 

Different thermal conductivity can be customized

( Thermal conductivity :( 0.3-3.0 W/m.k )

 

0.3 W/m.k For SP280.SP281.SP282.SP283

1.2 W/m.k For SP284.SP286.SP261

1.5 W/m.k For SP263.SP287

2.0 W/m.k For SP265.SP268.SP285

3.0 W/m.k For SS269
 

Two-component thermally conductive silicone gap filler


The bonding strength has high, medium, and low strength and is Removable (when the future battery pack is bad after replacing the new battery).


Excellent aging resistance and chemical resistance

 
 

Light-weight

Total vehicle weight is tied inextricably to the range of electric vehicles.
The battery pack is a major contributor, typically weighing between 600 and 700 kilograms for the average battery electric vehicle (BEV).

Smart lightweight designs can counterbalance part of this, and Sepna's engineering expertise and partnership with RLE International are fundamental for optimizing aluminum structures per crash standards and passenger safety.

 

Typical Applications
 

 
1. Used in communication equipment, automotive electronics;
2. Used in storage equipment, consumer electronics
3. Used in computers and peripheral equipment, with excellent insulation and heat dissipation, waterproof and moisture-proof.
4. Thermal conductive bonding of the energy storage battery module PACK box between the cooling plate.
.






 

Technical Data Sheet
 

 

  

Specification of Part-A (resin)
Items	Standard	Specification	Typical value
Colour	Visual	Blue	Blue
Viscosity (mPa.s) (Brookfield, 7# 10rpm)	GB/T 2794	120000-200000	120000
Density (g/cm^3)	GB/T 13354	1.9 ± 0.1	1.93

 

Specification of Part-B (hardener)
Items	Standard	Specification	Typical value
Colour	Visual	Yellow	Yellow
Viscosity (mPa.s) (Brookfield, 7# 10rpm)	GB/T 2794	120000-20000	125000
Density (g/cm^3)	GB/T 13354	1.90 ± 0.1	1.93

 

Specification after mixture
Items	Standard	Specification	Typical value
Mixing ratio	Volume ratio	A: B=1:1	/
Colour	Visual	Green	Green
Viscosity (mPa.s) (Brookfield, 7# 10rpm)	GB/T 2794	120000-20000	122500
Density (g/cm^3)	GB/T 13354	1.9 ± 0.1	1.93
Pot life (min)	/	40 - 60 (adjustable)	60

Specification after cured
Items	Standard	Specification	Typical value
Hardness (Shore A)	GB/T 531	60 ± 10	60
Tensile strength (MPa)	GB/T 528	≥0.15	0.153
Elongation (%)	GB/T 528	≥50	55
Dielectric constant @100kHz	GB/T 1409	≤ 7.0	7
Breakdown voltage KV/mm	GB/T 1408.1	≥10	10
Thermally conductivity (W/m.k)	ASTM D 5470	2.0 ± 0.1	2.05
Flame retardant (UL-94)	ANSI/UL-94	V-0	V-0
Service temperature (ºC)	/	-40 ~ +80	/
Note: The above typical values were all detected at 25 ºC;

 

The product can be cured with heating, the curing time under different temperatures refer to the following table (non-specified value)
Curing temperature	25ºC	80ºC	100ºC
Curing time	480min	30min	20min

 

 

PACKING AND STORAGE

 

Package specification:     Double tube packaging: 400ml/tube; 12 tubes/carton Bucket: 5 gallon/bucket Drum: 55 gallon/drum.

Storage: The product is recommended to be stored in a dry place at 10ºC-30ºC, avoiding direct sunlight or frost. The storage period is 6 months. After opening the package, the contents should be protected from moisture and used up as soon as possible.

Transportation:   moisture-proof, rainproof, sunproof, high-temperature roof, keep away from heat sources, handle with care, and do not squeeze or collide

 
 

 

Company Profile
 

SEPNA focuses on the R&D and production of advanced new materials. Headquartered in Shanghai, the factory is located in Qidong High-tech Zone, Jiangsu Province. It is a modern technology factory with an area of 20000 square meters.

SEPNA factory uses an advanced MES automatic quality control system and a full-process ERP management system for strict quality control. 

SEPNA factory and products have passed many international system certifications. Such as ISO9001-2015, SGS, 16949, and other certificates.

SEPNA adheres to the values of being "customer-centric, take technology as the blood, and focus on high-quality", adheres to the development concept of "DEVELOP DEPEND ON THE TECHNICAL INNOVATION, LIVE DEPEND ON THE QUALITY,"; Focus on providing customers with more accurate and safe products with "bonding, sealing and protection" functions.

SEPNA product lines, from flexible sealing, and fixed bonding to the development of multiple curing forms products, can fully match the production and manufacturing processes of different customers, and SEPNA can provide all customers with more options, higher efficiency, and better quality product solutions, as well as omnidirectional customized services and support.

 

SEPNA closely connects customers/suppliers/employees/partners with the mission of "Zero SL Bonds Us Together! ". 
And continues to promote technology and product innovation, service innovation, and talent innovation, better combine the value of products, services, and talents to make products more perfect, make industrial manufacturing more efficient, and provide more valuable products and service solutions for the high-end and high-end manufacturing industry!

Why Choose Us
 

1. Outstanding manufacturers and powerful factories.

2. OEM / ODM AVAILABLE (Professional design team providing package design solutions for OEM / ODM customers free of charge.
3. Free Samples.
4. Imported Raw Materials and Test Equipment.







5. Strict quality control (We have passed GB/T 19001-2016, IS09001:2015, and IATF 16949:2016 quality system authentication, and we can provide ROHS/SGS/ MSDS certification of products).
6. Deliver in 7-15 Days after payment.
7. Excellent QC Team and R&D Team.


8. Provide professional application technology solutions.
9. Complete the after-sales service system.
10. Partners with Top 500 Global Companies.


 

 

Our customers and Exhibition
 

 

Certification
 

 

About Transportation
 

Samples: Express ( FedEx, DHL, TNT, UPS, etc.)
Cargo:      By Sea ( FCL / LCL), By Air, By Railway, By truck, etc.

FAQ:
 

Q1. How to get an accurate quotation from us?
A1. Please provide your requirements, product specifications, quantity, and trade terms. 


Q2. Can you provide OEM service?
A2.Yes.Private labeling service is available

Q3. How to be SEPNA's distributor?
A3.As the growing of Sepna's global business, we need to find more and more distributors and agents
worldwide. SEPNA will provide the best solution and service for our partners.

For more information, pls contact our salesperson or call us:[phone]

Q4. Can I get a sample?
A4. Yes. We offer free samples

Q5. What is your product's shelf life?
A5.9 months when stored in cool dry and well-ventilated areas under 25ºC.