Sp299 Waterproof and Shockproof Effect Weather Resistant Polyurethane Potting Sealant for IGBT Potting, New Energy Vehicle Electrical Controller Potting

• Customization: Available
• CAS No.: 9009-54-5
• Formula: CH3h8n2o
• Model NO.: SP299
• EINECS: 210-898-8
• Bonding Function: Sealing and Potting
• Application: Automobile, Electronics
• Material: Polyurethane
• Classification: Two-Component
• Main Agent Composition: Polyurethane Elastomer
• Characteristic: Waterproof
• Promoter Composition: No
• Composition: PU
• Color: Clear
• Type: Two-Component
• Main Raw Material: Polyurethane Adhesive
• Advantage: High Bond Strength and Sealing
• Usage: Structural Bonding of New Energy Batteries
• OEM/ODM: Free OEM&ODM Service
• Shelf Life: 6 Months
• Mixture Ratio: a:B=100:100
• UL94: V-0
• Hardness/Shore a: 55
• Tensile Strength/MPa: >0.65
• Elongation at Break/%: 100
• Dielectric Strength/Kv / mm: > 20
• Dielectric Constant: 4.64
• Transport Package: Air, Sea, Road and Railway.
• Specification: 15KG
• Trademark: SEPNA
• Origin: China
• HS Code: 35069900
• Production Capacity: 1000000000

Product Description

Our products

 

SP299 waterproof and shockproof effect Weather resistant polyurethane potting sealant for IGBT potting, new energy vehicle electrical controller potting

 

SP299 is a solvent-free, weatherproof and environment-friendly two-component polyurethane electronic potting adhesive with a transparent color.

It has the characteristics of low hardness, good elasticity, excellent waterproof performance, and insulation performance.

 

 

 

 

Mixture ratio: AB=100:100 (Mass ratio)

Thermal conductivity 0.69W/m.k

  

Special features

 

 1. Light yellow transparent, low hardness, good elasticity, excellent shocking resistance;

2. Good sealing, waterproof, and shockproof effect;

3. Excellent electrical insulation, peelable and easy to repair;

 

 

Typical Applications

 

 

 

 
 

1. Electronic circuit board (PCB);

2. Electronic and electrical controller;

3. IGBT potting, new energy vehicle electrical controller potting, etc.

 

Technical Data Sheet

 

Specification of Part-A (resin)
Items	Standard		Specification		Typical value
Color	Visual		Light yellow transparent		Light yellow transparent
Viscosity (mPa.s)	GB/T 2794		700±150		720
Density (g/cm^3)	GB/T 13354		0.97 ± 0.1		0.97
Specification of Part-B (hardener)
Items	Standard		Specification		Typical value
Color	Visual		Light yellow transparent		Light yellow transparent
Viscosity (mPa.s)	GB/T 2794		500±150		370
Density (g/cm^3)	GB/T 13354		1.1 ± 0.1		1.09
Specification after mixture
Items		Standard		Specification		Typical value
Mixing ratio		Volume ratio		A: B=100:100		100:100
Color		Visual		Light yellow transparent		Light yellow transparent
Viscosity (mPa.s)		GB/T 2794		600±150		550
Density (g/cm^3)		GB/T 13354		1.1 ± 0.1		1.03
Pot life (min)		/		30± 10		30
Curing speed  25ºC/H		--		Full time		24

   

Specification after cured
Items	Standard	Specification	Typical value
Solid content %	GB/T 2793	≥98	99
Hardness (Shore A)	GB/T 531.1	55± 5	50
Tensile shear strength (MPa)	GB/T 528	≥0.4	0.65
Elongation at break (%)	GB/T 528	≥70	100
Dielectric Strength 25ºC,kV/mm	GB/T 1695	≥15	18
Dielectric constant 50Hz,25ºC	GB/T 1693	>0.3	4.5
Volume resistivity (Ω·cm)	ASTM D 257	≥ 10^11	3.5×10^11
Thermally conductivity (W/m.k)	ASTM D 5470	>0.6	0.69
Flame retardant (UL-94)	ANSI/UL-94	V-0	V-0
Water absorption rate 24H,25ºC, %	GB/T 8810	<0.3	0.13
Service temperature (ºC)	/	-60 ~ +120	/
Note: The above typical values were all detected at 25 ºC;

  

DIRECTIONS FOR USE

 

Manual mixing process (230g mixing volume)

1. Preheating: AB components in at low temperature, the viscosity will become high, it is recommended to preheat to 20 ~ 25 ºC, easy to use.

2. Mixing: Weigh the components A and B according to the proportion, mixing vertical stirring rod, clockwise (or counterclockwise) in the same direction and rapid mixing for 3 minutes, 110-120 circles/min, pay attention to the bottom of the container, the edge of the

The department should be stirred evenly, otherwise, there will be a localized phenomenon of non-curing.

3. Potting: Pour the mixed products into the device (Note: 2-3 minutes to fill the product with glue), if the product has a complex structure and large volume, it should be potted in stages.

 

 After using  

After using
 

The operating container will be cleaned before use. Mixing the main agent and stiffening agent, With the different kinds of stiffening agents and quantity. The process should be completed as soon as possible.

 

PACKING AND STORAGE

 
 

Package specification: PART A: 15KG per bucket PART B: 15KG per bucket

Storage:   Shelf life: 6 months in unopened packaging in a cool and dry storage place at temperatures between +8ºC to + 28ºC.

Transportation:   Moisture-proof, rainproof, sunproof, high-temperature roof, keep away from heat sources, handle with care, and do not squeeze or collide.

 

 

Company Profile

SEPNA is committed to the research, development, and production of advanced new materials. The products are centered around MS polymer, epoxy resins, polyurethane, the formation of new energy, high-end assembly, and electronic adhesives three major series of products.

Focus on the core business, focusing on providing customers with more suitable and more secure "bonding, sealing, protection" new materials.
 

Mainly for new energy vehicles, energy storage and elevators, electronics, modified vehicle manufacturing, and other areas of domestic and

foreign customers to provide a series of differentiated and refined new materials products and integrated solutions.

Our factory adopts an ERP automated quality control system, and a full-process ERP management system, and has passed IATF16949, ISO 9001, ISO14001, and ISO45001 system certifications.

 

 

Why Choose Us

1. Outstanding manufacturers and powerful factories.

2. OEM / ODM AVAILABLE (Professional design team providing package design solutions for OEM / ODM customers free of charge.
3. Free Samples.
4. Imported Raw Materials and Test Equipment.





5. Strict quality control (We have passed GB/T 19001-2016, IS09001:2015, and IATF 16949:2016 quality system authentication, and we can provide  ROHS/SGS/ MSDS certification of products).
6. Deliver in 7-15 Days after payment.
7. Excellent QC Team and R&D Team.



8. Provide professional application technology solutions.
9. Complete the after-sales service system.
10. Partners with Top 500 Global Companies.

Sepna's products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia the Middle East, Oceania, etc.

Until now, she has serviced nearly 1000 enterprises all over the world.
 



 

Our customers and Exhibition

 

Certification

 

About Transportation

Samples: Express ( FedEx, DHL, TNT, UPS, etc.)
Cargo:      By Sea ( FCL / LCL), By Air, By Railway, By truck, etc.

FAQ:

Q1. How to get an accurate quotation from us?
A1. Please provide your requirements, product specifications, quantity, and trade terms. 


Q2. Can you provide OEM service?
A2.Yes.Private labeling service is available

Q3. How to be SEPNA's distributor?
A3.As the growing of Sepna's global business, we need to find more and more distributors and agents
worldwide. SEPNA will provide the best solution and service for our partners.

For more information, pls contact our salesperson or call us:[phone]

Q4. Can I get a sample?
A4. Yes. We offer free samples

Q5. What is your product's shelf life?
A5.9 months when stored in cool dry and well-ventilated areas under 25ºC.